Cleform

Future Solutions Now 'Eliminator' Concrete Remover

Environmentally Friendly
Quart Part # 704246, Gallon 704247, 5 gal. Tote 704248 55 gal Drum 704249


Cleform Tool and Congo Products are proud to bring you environmentally friendly products that you can use everyday and save you money. Our new concrete remover,”Eliminator” is a formulated chemically active liquid designed to remove hardened concrete build up from most surfaces. Works great on concrete and mortar mixers, concrete forms, tools, screeds, trowels, hardware, ready-mix trucks, equipment and numerous other applications.

Mixing: “Eliminator” Concrete remover is highly concentrated and should be diluted with common tap water from a minimum of two to one and as much as seven to one ratio depending on the amount of build up to be removed. If possible, immersion is the best application method. A light foaming or fizzing action will occur when applied. Allow to soak and Re-spray as needed, as build up softens remove with a scraper or power washer.

Eliminator Concrete Remover contains No muriatic, sulfuric, phosphoric, hydrofluoric, or hydrochloric acids.

Because of this less corrosive nature this product can be used on most metal, painted and plastic surfaces without damage. It may slightly etch clean metal surfaces, an exposure test is recommended to insure compatibility. Clean up with soap and water. Environmentally friendly will not contaminate ground water and can be flushed down drain.

Keep out of reach of children, do not take internally, do not breath vapors and avoid prolonged contact with skin. Use rubber gloves and safety goggles. Refer to MSDS safety data sheet for technical information before using this product.

For Heavy Duty Cleaning mix 1 part Eliminator to 2-3 parts water
For Medium Duty Cleaning mix 1 part Eliminator to 4-5 parts water
For Light Duty Cleaning mix 1 part Eliminator to 6-7 parts water.



Future Solutions Now 'Brick Brite' Brick Cleaner

Environmentally Friendly
Quart Part # 704246B, Gallon 704247B, 5 gal. Tote 704248B 55 gal Drum 704249B


Cleform Tool and Congo Products are proud to bring you environmentally friendly products that you can safely use everyday. Our new brick cleaner, ”Brick Brite” is a formulated chemically active liquid. This amazing cleaner utilizes state of the art surfactant technology and small molecular size to penetrate deep inside mortar residues and react from within. It is this unique formulation that makes it ideal for cleaning and maintaining masonry surfaces, tools, equipment, and vehicles. Brick Brite is strong enough to quickly and easily remove mortar on contact.

Mixing: “Brick Brite” brick cleaner is highly concentrated and should be diluted with common tap water from a minimum of two to one and as much as seven to one ratio depending on the amount of build up to be removed. If possible, immersion is the best application method. A light foaming or fizzing action will occur when applied. Allow to soak and Re-spray as needed, as build up softens remove with water hose or power washer.

Brick Brite contains No muriatic, sulfuric, phosphoric, hydrofluoric, or hydrochloric acids.

Because of this less corrosive nature this product can be used on most metal, painted and plastic surfaces without damage. It may slightly etch clean metal surfaces, an exposure test is recommended to insure compatibility. Clean up with soap and water. Environmentally friendly will not contaminate ground water and can be flushed down drain.
Keep out of reach of children, do not take internally, do not breath vapors and avoid prolonged contact with skin. Use rubber gloves and safety goggles. Refer to MSDS safety data sheet for technical information before using this product.

For Heavy Duty Cleaning mix 1 part Brick Brite to 2-3 parts water
For Medium Duty Cleaning mix 1 part Brick Brite to 4-5 parts water
For Light Duty Cleaning mix 1 part Brick Brite to 6-7 parts water.





Cleform Tool Corporation
4343 Easton Road
St. Joseph, MO 64503
E-mail: sales@cleform.com
Hours: 8:00 am - 5:00 pm CST
Phone: 800.253.3676 (800-CLEFORM)
Fax: 888.253.3676 (888-CLEFORM)